Last checked: October 2026.
A French drain is a gravel-filled trench with a perforated pipe in it. It collects water from soggy ground and carries it away by gravity, with no pump or power. In Okanagan yards it is the usual fix for lawns that stay wet after rain, water pooling against the house, and pressure building up behind retaining walls.

Signs Your Yard Needs Better Drainage
- Standing water a day or two after rain or snowmelt.
- Water pooling against the foundation, or seeping into the basement.
- A lawn that stays soggy through spring.
- Erosion channels or soil washing across paths and patios.
- Runoff coming onto your lot from an uphill neighbour.
- A retaining wall that is leaning, bulging or wet at the base.
Spring snowmelt and slow-draining clay soils, common around Kelowna and West Kelowna, make these problems more common on Okanagan hillside lots.
How a French Drain Is Built
- Plan the route and the outlet. The water has to go somewhere lower: a pop-up emitter, a lower part of the property (daylight), or a storm drain connection where your municipality allows it.
- Call before you dig. Request a free utility locate through BC 1 Call before any excavation.
- Dig the trench. Typical yard drains are about 1–2 ft deep, shallow curtain drains about 9–18 in, and drains along a foundation go deeper, often to the footing.
- Keep it sloping. Aim for about a 1% grade, roughly 1 inch of drop every 8–10 feet, so water keeps moving toward the outlet.
- Line it with fabric. Non-woven geotextile around the gravel stops soil from washing in and clogging the drain.
- Use angular crushed stone. Washed, angular stone leaves open space for water. Rounded pea gravel and sand shift and clog.
- Lay perforated pipe in the stone with the holes facing down, then wrap the fabric over the top and backfill.
French drains can struggle in very dense clay or where the water table is high; in those cases a sump or a different approach may be needed. A qualified contractor will check this during the estimate.
Other Ways to Fix Drainage
- Regrading: reshaping the soil so the ground slopes away from the house.
- Downspout extensions: carrying roof water well away from the foundation.
- Swales: shallow, grassed or rock-lined channels that guide surface water around problem areas.
- Catch basins: grated inlets that collect surface water from patios and low spots and pipe it away.
- Drainage behind retaining walls: drain rock and a perforated pipe behind every wall. Missing or clogged wall drainage is the main reason walls lean; see how to fix a leaning retaining wall.
What a French Drain Costs
Shallow yard French drains are the less expensive end: U.S. guides put them around $10–$75 per linear foot. Drains installed around a foundation are a much bigger job, with excavation to the footing, membrane and backfill; in Canada these run about $100–$250 per linear foot, or roughly $10,000–$25,000 for a typical home. Clay, rock, tight access and soil disposal all raise the price. See our Okanagan cost guide for walls and patios.
More on landscape drainage & retaining wall repair and hillside erosion control.
Sources
- Lawn Love – What Is a French Drain? (updated August 2026)
- RenoQuotes – French Drain Cost in Canada in 2026 (updated September 2026)
This guide is general information. Drains near foundations, slopes or retaining walls should be designed by a qualified contractor.
Get a Free Drainage Estimate
Tell us where the water is collecting and a local contractor will be in touch to arrange a free estimate. Prefer to talk? Call 257-883-1211.