Last checked: October 2026. Municipal rules change, so always confirm with your local building department before you build.
In most of the Okanagan, a retaining wall taller than about 1.2 m (4 ft) needs a permit, and usually an engineered design. In the rural areas of the Regional District of Central Okanagan the trigger is 1.5 m. Here is what each area’s own published rules say, and what to do next.

Retaining Wall Permit Rules at a Glance
| Area | When you need approval | Source |
|---|---|---|
| Kelowna | Individual walls are limited to 1.2 m, measured from the lower side. Taller walls need a Development Variance Permit approved by Council. | City of Kelowna bulletins |
| Vernon | A Retaining Wall Permit for walls 1.2 m or taller, walls with substantial load above them, or work in a sensitive land area. Walls over 1.2 m also need a Development Variance Permit. | City of Vernon |
| Penticton | Walls higher than 1.2 m require a building permit. Taller walls in required yards have needed Council approval. | iNFOnews report |
| Central Okanagan rural areas (RDCO) | A building permit and engineering for walls over 1.5 m. Maximum height 2.5 m without a variance. | RDCO brochure |
| West Kelowna | No published retaining wall guide found. Contact the City of West Kelowna building department. | — |
| Lake Country | No published retaining wall guide found. Contact the District of Lake Country building department. | — |
Kelowna Retaining Wall Rules
- Height limit: an individual retaining wall can’t be taller than 1.2 m, measured from grade on the lower side.
- Taller walls: walls over 1.2 m need a Development Variance Permit (DVP) approved by City Council, plus a soil permit with sealed engineered drawings and an Engineers and Geoscientists BC (EGBC) Engineer of Record assurance statement.
- Tiered walls: the City’s retaining wall bulletin allows a maximum of two tiers and 2.4 m in total, with the walls at least 1.2 m apart.
- Fences on walls: the combined height of a wall and the fence on top can’t exceed 2.0 m.
- Moving soil: bringing in or removing 50 cubic metres of soil or more per property in a calendar year needs a Soil Deposit Permit.
- Building without approval: the City can post a Stop Work Order and may require the wall to be removed.
Kelowna’s retaining wall bulletin was written under the older Zoning Bylaw 8000. The 1.2 m limit carries over to the current Zoning Bylaw 12375, but confirm tier and fence details with the City before you apply.
Vernon Retaining Wall Permits
- When it’s required: building, altering or replacing a retaining wall 1.2 m (3.94 ft) or taller, a wall with substantial load above it, or any wall in a sensitive land area.
- Over 1.2 m: you also need a complete Development Variance Permit before the City will process the retaining wall permit.
- Cost: a $150 application fee plus a security deposit, set after review and refunded after the final inspection.
Penticton Retaining Wall Permits
Penticton requires a building permit for retaining walls higher than 1.2 m. Walls taller than the zoning limit in a required yard have gone to City Council for a variance, and geotechnical engineers have been involved in approving taller walls.
Rural Central Okanagan (RDCO)
For properties in the Regional District of Central Okanagan’s rural areas (outside the cities), the RDCO’s 2025 brochure says:
- Walls under 1.5 m are treated as landscaping walls and don’t need a building permit.
- Walls over 1.5 m, measured from the bottom of the foundation, need a building permit and engineering drawings.
- The maximum height is 2.5 m unless a Development Variance Permit is approved.
- Walls less than 2.0 m apart are measured as one wall, adding their heights together.
- Any wall in a riparian or floodplain area, or one supporting a road or lane, needs a permit regardless of height.
West Kelowna and Lake Country
We couldn’t find a published retaining wall guide from the City of West Kelowna or the District of Lake Country. Both have hillside properties where walls are common, so call the building department with your wall height and location before you start. Most B.C. municipalities use a 1.2 m threshold, but check yours.
How to Avoid Permit Problems
- Measure from the low side. Height is usually measured from the lower finished grade, or from the bottom of the footing in the RDCO.
- Consider terracing. Two shorter walls with enough space between them can stay under the height limits, but walls built too close together are measured as one.
- Bring in an engineer early for anything over 1.2 m, anything holding up a driveway or building, and anything on a steep or sensitive slope.
- Get permits before you dig. A variance can take weeks to reach Council, so start early if your wall needs one.
Building in Kelowna? Our Kelowna retaining walls page covers wall types, costs and the neighbourhoods we serve.
Sources
- City of Kelowna – Lot Grading bulletin (PDF)
- City of Kelowna – Retaining Wall bulletin (PDF)
- City of Vernon – Retaining Wall Permit Application
- iNFOnews – Too-tall retaining wall coming before Penticton city council
- Regional District of Central Okanagan – Retaining Walls brochure, 2025 (PDF)
This guide is general information, not legal or engineering advice.
Planning a Retaining Wall? Get a Free Estimate
Tell us about your wall and a local contractor who handles permits and engineered walls will be in touch. Prefer to talk? Call 257-883-1211.